|

Voc Satin Floor Poly
Minwax VOC Fast Drying Polyurethane For Floor Polyurethane for floors has 3 big benefits that make it unique and different from fast-dry poly. First, the dry time is 3 to 4 hours, 25% faster than traditional poly. Second, if you recoat within 12 hours, you don't have to sand between coats. Third, poly for floors is formulated with advanced anti-setting agents that keep the flattener (used in satin and semi-gloss) suspended all day, which results in less stirring time. This clear, oil-based protective finish is specifically formulated for hardwood floors. Apply with natural bristle brush or synthetic stain pad. Drying time could be longer if using a lambswool applicator due to thicker coat. Can be applied over Minwax wood finish or gel stain. The result is a beautiful, durable, even sheen across the floor. Covers approximately 400 to 450 sq. ft. per gallon depending on porosity of surface. Clean up with mineral spirits. VOC compliant in some areas. An EnviroLINK Product: This product meets the standards for energy efficiency and reduced impact on the environment.
View Details
|
771236 |
Voc Satin Floor Poly |
3 |
72.99 |
/ GL |
130250000 |
|
|

Gloss Floor Polyurethane
Delivers superior polyurethane durability with the convenience of a water-based finish. It is formulated to withstand heavy foot traffic. Imparts floors with depth and warmth, enhancing a floor's natural wood grain. Great for all hardwood interior floors, no sanding between coats. Fast drying formula allows recoat in 2 to 3 hours. Low odor of the water-based poly and it's easy clean up with soap and warm water completes the topcoating in 1 day. Water-based polyurethane can be used to recoat a floor that was previously finished with an oil-based poly as long as the floor is prepared following the label directions. The water-based poly can be applied over oil-based Minwax stains. It is not recommended to use water-based stains on floors because they dry quickly making them difficult to apply evenly on large surface areas. 3 coats of water-based polyurethane are recommended for heavy traffic areas. Water-based polyurethane base coat must be applied on unstained wood floors prior to applying the water-based polyurethane for floors to avoid tannin discoloration in natural wood. Covers approximately 400 to 500 sq. ft. per gallon. Size: Gallon.
View Details
|
772592 |
Gloss Floor Polyurethane |
2 |
99.99 |
/ GL |
131010000 |
|
|

S/g Floor Polyurethane
Delivers superior polyurethane durability with the convenience of a water-based finish. It is formulated to withstand heavy foot traffic. Imparts floors with depth and warmth, enhancing a floor's natural wood grain. Great for all hardwood interior floors, no sanding between coats. Fast drying formula allows recoat in 2 to 3 hours. Low odor of the water-based poly and it's easy clean up with soap and warm water completes the topcoating in 1 day. Water-based polyurethane can be used to recoat a floor that was previously finished with an oil-based poly as long as the floor is prepared following the label directions. The water-based poly can be applied over oil-based Minwax stains. It is not recommended to use water-based stains on floors because they dry quickly making them difficult to apply evenly on large surface areas. 3 coats of water-based polyurethane are recommended for heavy traffic areas. Water-based polyurethane base coat must be applied on unstained wood floors prior to applying the water-based polyurethane for floors to avoid tannin discoloration in natural wood. Covers approximately 400 to 500 sq. ft. per gallon. Size: Gallon.
View Details
|
772618 |
S/g Floor Polyurethane |
1 |
99.99 |
/ GL |
131020000 |
|
|

Satin Floor Polyurethane
Delivers superior polyurethane durability with the convenience of a water-based finish. It is formulated to withstand heavy foot traffic. Imparts floors with depth and warmth, enhancing a floor's natural wood grain. Great for all hardwood interior floors, no sanding between coats. Fast drying formula allows recoat in 2 to 3 hours. Low odor of the water-based poly and it's easy clean up with soap and warm water completes the topcoating in 1 day. Water-based polyurethane can be used to recoat a floor that was previously finished with an oil-based poly as long as the floor is prepared following the label directions. The water-based poly can be applied over oil-based Minwax stains. It is not recommended to use water-based stains on floors because they dry quickly making them difficult to apply evenly on large surface areas. 3 coats of water-based polyurethane are recommended for heavy traffic areas. Water-based polyurethane base coat must be applied on unstained wood floors prior to applying the water-based polyurethane for floors to avoid tannin discoloration in natural wood. Covers approximately 400 to 500 sq. ft. per gallon. Size: Gallon.
View Details
|
772626 |
Satin Floor Polyurethane |
2 |
99.99 |
/ GL |
131030000 |
|
|

Pre-stn Wood Conditioner
A Pre-Stain conditioner for use on soft woods such as pine, fir, and spruce to assure even stain penetration. Wood may be stained immediately after application of Wood Conditioner.
View Details
|
788902 |
Pre-stn Wood Conditioner |
3 |
11.49 |
/ HP |
134074444 |
|
|

Golden Oak Wood Stain
A penetrating oil-based wood stain, which provides beautiful rich color that enhances the natural wood grain. Ideal for use on unfinished wood furniture, woodwork, doors, hardwood floors, cabinets and accessories. 1 coat recommended. To darken the color, apply a second coat after 4-6 hours.
View Details
|
780523 |
Golden Oak Wood Stain |
Please Call for Availability |
8.99 |
/ HP |
221024444 |
|
|

Red Oak Wood Stain
A penetrating oil-based wood stain, which provides beautiful rich color that enhances the natural wood grain. Ideal for use on unfinished wood furniture, woodwork, doors, hardwood floors, cabinets and accessories. 1 coat recommended. To darken the color, apply a second coat after 4-6 hours.
View Details
|
781951 |
Red Oak Wood Stain |
2 |
8.99 |
/ HP |
221504444 |
|
|

Sedona Red Wood Stain
A penetrating oil-based wood stain, which provides beautiful rich color that enhances the natural wood grain. Ideal for use on unfinished wood furniture, woodwork, doors, hardwood floors, cabinets and accessories. 1 coat recommended. To darken the color, apply a second coat after 4-6 hours.
View Details
|
788368 |
Sedona Red Wood Stain |
3 |
8.99 |
/ HP |
222204444 |
|
|

Colnl Maple Wood Stain
A penetrating oil-based wood stain, which provides beautiful rich color that enhances the natural wood grain. Ideal for use on unfinished wood furniture, woodwork, doors, hardwood floors, cabinets and accessories. 1 coat recommended. To darken the color, apply a second coat after 4-6 hours.
View Details
|
773924 |
Colnl Maple Wood Stain |
3 |
8.99 |
/ HP |
222304444 |
|
|

Spec Walnut Wood Stain
A penetrating oil-based wood stain, which provides beautiful rich color that enhances the natural wood grain. Ideal for use on unfinished wood furniture, woodwork, doors, hardwood floors, cabinets and accessories. 1 coat recommended. To darken the color, apply a second coat after 4-6 hours.
View Details
|
773014 |
Spec Walnut Wood Stain |
3 |
8.99 |
/ HP |
222404444 |
|
|

Red Mahogany Wood Stain
A penetrating oil-based wood stain, which provides beautiful rich color that enhances the natural wood grain. Ideal for use on unfinished wood furniture, woodwork, doors, hardwood floors, cabinets and accessories. 1 coat recommended. To darken the color, apply a second coat after 4-6 hours.
View Details
|
781041 |
Red Mahogany Wood Stain |
5 |
8.99 |
/ HP |
222504444 |
|
|

Early Americn Wood Stain
A penetrating oil-based wood stain, which provides beautiful rich color that enhances the natural wood grain. Ideal for use on unfinished wood furniture, woodwork, doors, hardwood floors, cabinets and accessories. 1 coat recommended. To darken the color, apply a second coat after 4-6 hours.
View Details
|
781988 |
Early Americn Wood Stain |
5 |
8.99 |
/ HP |
223004444 |
|
|

Cherry Wood Stain
A penetrating oil-based wood stain, which provides beautiful rich color that enhances the natural wood grain. Ideal for use on unfinished wood furniture, woodwork, doors, hardwood floors, cabinets and accessories. 1 coat recommended. To darken the color, apply a second coat after 4-6 hours.
View Details
|
770856 |
Cherry Wood Stain |
4 |
8.99 |
/ HP |
223504444 |
|
|

Fruitwood Wood Stain
A penetrating oil-based wood stain, which provides beautiful rich color that enhances the natural wood grain. Ideal for use on unfinished wood furniture, woodwork, doors, hardwood floors, cabinets and accessories. 1 coat recommended. To darken the color, apply a second coat after 4-6 hours.
View Details
|
781871 |
Fruitwood Wood Stain |
2 |
8.99 |
/ HP |
224104444 |
|
|

Golden Pecan Wood Stain
A penetrating oil-based wood stain, which provides beautiful rich color that enhances the natural wood grain. Ideal for use on unfinished wood furniture, woodwork, doors, hardwood floors, cabinets and accessories. 1 coat recommended. To darken the color, apply a second coat after 4-6 hours.
View Details
|
782076 |
Golden Pecan Wood Stain |
Please Call for Availability |
8.99 |
/ HP |
224504444 |
|